This type tension sensor can accurately detect the resultant force produced by pulling the material at the wrapping angle. It is mounted above the sensor which is easy to replace and install the Pillow Block and tension roller. The Pillow Block is separated up&down to facilitate installation and replacement of measuring rolls. Stable and accurate signal. compact structure and little deformation.
Features
● Easy to install and replace the bearing and roller;
● Small size, little space required for installation;
● Minor temperature drift,good non-linearity and repeatability;
● Strong connections provide long-term reliability;
● Customizable;
● Standard M12*1 plug
Description
XJC-ZL16 series Pillow Block type tension sensor can accurately detect the resultant force produced by pulling the material at the wrapping angle. The Pillow Block is mounted above the sensor which is easy to replace and install the Pillow Block and tension roller. The Pillow Block can be separated up and down to facilitate installation and replacement of measuring rolls. Stable and accurate signal. Compact structure and little deformation. Each sensor is verified by high and low temperature to ensure performance.
Technical Parameter
Rated output | 2.0±0.2%mV/V | Non-linearity | 0.25% F.S. |
Repeatability | 0.15%F.S. | Zero balance | ±2% F.S. |
Operating temp range | -20~80°C | Compensated temp range | -10~40°C |
Temp effect on zero | 0.02%F.S/°C | Insulation | ≥2000MΩ/100VDC |
Recommended excitation voltage | 5~10VDC | Limit load | 200%F.S. |
Cable size | φ5x5m | Protection class | IP65 |
Dimensions
Force calculation
Installation
Thank you for your message. We will reply to your message within 24 hours. Please look for emails with the suffix @xjcsensor.com.