X-ZL09 Series Pillow Block type Tension Sensor

X-ZL09 Series Pillow Block type Tension Sensor

It is installed in pairs at the end of the measuring roll, which can accurately detect the resultant force produced by pulling the material at the wrapping angle. It is designed to install the pillow block on the sensor, which is easy to replace and install the pillow block and roller. Accurate and stable signal with resistance strain formulaprinciple. Compact structure and little deformation.

Features

● Easy to install and replace the bearing and roller;

● Built-in new mechanical 10 times anti-overload protection;

● Minor temperature drift,good non-linearity and repeatability;

● Strong connections provide long-term reliability;

● Drilling and tapping are available;

● Standard M12*1 plug

 

Description

XJC-ZL09 series Pillow Block type tension sensor is installed in pairs at the end of the measuring roll, which can accurately detect the resultant force produced by pulling the material at the wrapping angle. This series is designed to install the pillow block on the sensor, which is easy to replace and install the pillow block and roller. Accurate and stable signal with resistance strain formulaprinciple. Compact structure and little deformation. Each sensor is verified by high and low temperature to ensure performance.

 

Technical Parameter

Rated output2.0±0.2%mV/VNon-linearity0.5% F.S.
Repeatability0.2%F.S.Zero balance±2% F.S.
Operating temp range-20~80°CCompensated temp range-10~40°C
Temp effect on zero0.02%F.S/°CInsulation≥2000MΩ/100VDC
Recommended excitation voltage5~10VDCLimit load1000%F.S.
Cable sizeφ5x5mProtection classIP65

 

Dimensions

Note: The capacity is only the value for a single sensor, if the two sides are assembled, it is twice the above.

Force calculation

 

Installation

Contact Us

Get the latest catalogs and quotations.

Thank you for your message. We will reply to your message within 24 hours. Please look for emails with the suffix @xjcsensor.com.