Welcome To XJCSENSOR

XJC-608T-F meter

Short Description:

XJC-608T Intelligent transmission module

1. High speed dynamic sampling

2. High precision

3. Multiple working modes can be switched

4. Can test the maximum, minimum, average and other working modes.

5. High-speed serial port transmission can be realized

6. Multiple transmission outputs are available:0-10V 4-20mA RS232 RS485


Product Detail

Product Tags

Data acquisition of force sensor:

1. Supporting push-pull force gauge (requires sensitivity to the sensor (2.0MV/V)

2. The PLC module directly collects MV 0-10V 4-20MA, etc. (requires sampling speed, frequency response, etc. for the sensor)

3. Data acquisition card (MV 0-10V, etc.)

4. Whether the force sensor is involved in the control.

608T-F

Precautions for selection of load cell:

1. The normal operating force range should be more than 10% of the full scale of the sensor, and the best effect is within 80%.

2. The range of normal operating force, the maximum output of the equipment (output of servo motors, cylinders, etc.) overshooting force should be taken into consideration in advance when selecting the sensor.

3. The accuracy of the sensor: Absolute accuracy, relative accuracy, use required accuracy, repeat accuracy, dynamic accuracy and static accuracy, measurement accuracy, control accuracy, system accuracy.

4. Installation method: screw fixing, plane fixing, external dimension requirements: length, width, height, outer diameter, etc.

5. Force method: Point force, surface force, through hole force, tension measurement, pressure measurement, torque, etc.


  • Previous:
  • Next:

  • Write your message here and send it to us