• English

No relevant currency found

XJT-T300F Transmitter

The tension transducer converts mV output signal of tension sensors into analog signal digital signal in real time, and provide closed loop control for PLC, servo drive, IPC and other control systems.It adopts guide rail type installation. With built-in digital display, tension is displayed in real time. It is convenient for rapid tension reset and alarm output with switching I/O nodes.
$000
$000
Multiple transportation way
High quality
Trade Assurance
Secure payments
Model
XJC-T300F
XJC-T300F
Quantity
Only 0 left
Description

Features

●Analog input/output: CH-1/CH-2

●Switching input/output: CH-2/CH-2

●Reset: switch input, clear command, panel reset,automatic zero clearing when power.

●Analog transmission: 0-10V,±10V,4-20mA,1-10V

●Digital output: RS232,RS485

●Protocol: MODBUS-RTU,TC-ASCII

●Analog transmission range: -100% - +100%FS

 

Description

The tension transducer converts millivolt output signal of tension sensors into analog signal or digital signal in real time, and provide closed loop control for PLC, servo drive, IPC and other control systems.The transducer adopts guide rail type installation. With built-in digital display, tension can be displayed in real time. It is convenient for rapid tension reset and alarm output with switching input and output nodes.

 

Technical Parameter

Power supply

DC24V/5W

AD resolution

24 bit

Sensor's supply voltage

5VDC,200mA

Sampling rate

480-1920 Times/Sec.

Input signal range

0-20mV

Transmitting speed

=Sampling rate

Non-linearity 

0.03%F.S.

Switch output type & capacity

NPN/PNP,500mA

Accuracy

0.03%F.S.

Switch input type

NPN


Dimensions

 

Selection

Model Input signal  Power supply  Signal output Special requirements
XJC-T300F

M:mV

 

D:24VDC

R2: RS232,

R4: RS485,

V:0-10V(±10V,1-10V)

A:4-20mA

 

 

Y/N
Contact us
Name*
0/255
Email*
0/255
Message
0/1024