X-ZL09 Series Pillow Block type Tension Sensor
X-ZL09 Series Pillow Block type Tension Sensor
It is installed in pairs at the end of the measuring roll, which can accurately detect the resultant force produced by pulling the material at the wrapping angle. It is designed to install the pillow block on the sensor, which is easy to replace and install the pillow block and roller. Accurate and stable signal with resistance strain formulaprinciple. Compact structure and little deformation.
Category
X-ZL09 Series Pillow Block type Tension Sensor
Features
● Easy to install and replace the bearing and roller;
● Built-in new mechanical 10 times anti-overload protection;
● Minor temperature drift,good non-linearity and repeatability;
● Strong connections provide long-term reliability;
● Drilling and tapping are available;
● Standard M12*1 plug
Description
XJC-ZL09 series Pillow Block type tension sensor is installed in pairs at the end of the measuring roll, which can accurately detect the resultant force produced by pulling the material at the wrapping angle. This series is designed to install the pillow block on the sensor, which is easy to replace and install the pillow block and roller. Accurate and stable signal with resistance strain formulaprinciple. Compact structure and little deformation. Each sensor is verified by high and low temperature to ensure performance.
Technical Parameter
| Rated output | 2.0±0.2%mV/V | Non-linearity | 0.5% F.S. |
| Repeatability | 0.2%F.S. | Zero balance | ±2% F.S. |
| Operating temp range | -20~80°C | Compensated temp range | -10~40°C |
| Temp effect on zero | 0.02%F.S/°C | Insulation | ≥2000MΩ/100VDC |
| Recommended excitation voltage | 5~10VDC | Limit load | 1000%F.S. |
| Cable size | φ5x5m | Protection class | IP65 |
Dimensions
Note: The capacity is only the value for a single sensor, if the two sides are assembled, it is twice the above.
Force calculation
Installation
