X-ZL08 Series Flange Tension Sensor
X-ZL08 Series Flange Tension Sensor
It is installed in pairs at the end of the measuring roll, which can accurately detect the resultant force produced by pulling the material at the wrapping angle. The sensor is designed with a low outline that can minimize the space requirement within the inner frame. Split coupling design makes it easy to install and replace. Standard and flange installation are available.
Category
X-ZL08 Series Flange Tension Sensor
Features
● Compact structure, can be installed in narrow equipment;
● Built-in self-aligning bearing (two ends are not in the same surface), which can compensate for bearing expansion and misalignment;
● Built-in new mechanical 10 times anti-overload protection;
● Minor temperature drift,good non-linearity and repeatability;
● Strong connections provide long-term reliability;
● Two installation directions are available;
● Standard M12*1 plug
Description
XJC-ZL08 series fange tension sensor is installed in pairs at the end of the measuring roll, which can accurately detect the resultant force produced by pulling the material at the wrapping angle. The sensor is designed with a low outline that can minimize the space requirement within the inner frame. Split coupling design makes it easy to install and replace. Standard and flange installation are available. Accurate and stable signal with resistance strain formulaprinciple. Compact structure and little deformation. Each sensor is verified by high and low temperature to ensure performance.
Technical Parameter
| Rated output | 2.0±10%mV/V | Non-linearity | 0.5% F.S. |
| Repeatability | 0.2%F.S. | Zero balance | ±2% F.S. |
| Operating temp range | -20~80°C | Compensated temp range | -10~40°C |
| Temp effect on zero | 0.02%F.S/°C | Insulation | ≥2000MΩ/100VDC |
| Recommended excitation voltage | 5~10VDC | Limit load | 1000%F.S. |
| Cable size | φ5x5m | Protection class | IP65 |
Dimensions
Force calculation
Installation
