X-TS08 Series
X-TS08 Series
Sensors are used to monitor the pressure value when pressing down and holding pressure in real time, to ensure that the pressure value is consistent and in line with the process requirements. Avoid too much or little pressure value resulting in cell damage or loose cell and other problems. High-precision flat type sensors, spoke type sensors and thin planar pressure sensors are generally chosen.
Category
X-TS08 Series
Features
● High precision resistance strain gauge principle;
●Strong resistance to partial load;
●Good temperature characteristics with high and low temperature compensation;
●Easy to install and use;
●High dynamic response frequency.
Technical Parameter
| Material | Alloy steel | Rated output | 2.0±10%mV/V |
| Zero balance | ±2%F.S. | Non-linearity | ≤±0.1%F.S. |
| Hysteresis | ≤±0.1%F.S. | Repeatability | ≤±0.1%F.S. |
| Creep(30 min) | ≤±0.1%F.S. | Temp effect on output | 0.2%F.S./10°C |
| Temp effect on zero | 0.2%F.S./10°C | Input impedance | 350±5Ω |
| Output impedance | 350±5Ω | Insulation | ≥5000MΩ/100VDC |
| Recommended excitation | 5V | Maximum excitation | 10VDC |
| Compensated temp range | -10~40°C | Operating temp range | -20~80°C |
| Limit load | 150% | Breaking load | 200% |
| Cable size | φ3×4m | Life | Full scale more than 1 million times |
| Cable Connection | Ex+: Red；Ex-: Black；Sig+: Green；Sig-: White | ||
Dimensions
Load Direction & Wiring Code
Applications
Application: sensors are used to monitor the pressure value when pressing down and holding pressure in real time, to ensure that the pressure value is consistent and in line with the process requirements. Avoid too much or too little pressure value resulting in cell damage or loose cell and other problems. High-precision flat type sensors, spoke type sensors and thin planar pressure sensors are generally chosen.
