Welcome to XJCSENSOR. For assistance, email [email protected]
Search
Close this search box.

X-T10 Transmitter

X-T10 Transmitter

The tension transducer converts millivolt output signal of tension sensors into analog signal or digital signal in real time, and provide closed loop control for PLC, servo drive, IPC and other control systems. It adopts guide rail type installation. With built-in digital display, tension is displayed in real time. It is convenient for rapid tension reset and alarm output with switching I/O nodes

X-T10 Transmitter

Features

●Display digital: 6-digit

●Switching input/output: CH-1/CH-2

●Reset: panel, switch input, clear command;

●Analog transmission: 0-10V,±10V,4-20mA

●Digital output: RS232,RS485

●Protocol: MODBUS-RTU,TC-ASCII

●Analog transmission range: -100% – +100%FS

●Power reverse polarity protection.

 

Description

The tension transducer converts millivolt output signal of tension sensors into analog signal or digital signal in real time, and provide closed loop control for PLC, servo drive, IPC and other control systems. The transducer adopts guide rail type installation. With built-in digital display, tension can be displayed in real time. It is convenient for rapid tension reset and alarm output with switching input and output nodes.

Technical Parameter

Power supplyDC24V/5WAD resolution24 bit
Sensor’s supply voltage5VDC,200mASampling rate480-1920 Times/Sec.
Input signal range0-20mVTransmitting speed=Sampling rate
Non-linearity0.01%F.S.Switch output type & capacityNPN/PNP,500mA
Accuracy0.5%F.S.Switch input typeNPN


Dimensions

Selection

ModelInput signalAccurancyPower supplySignal outputSpecial requirements
XJC-T100FM:mVB:0.05%

D:0.1%-0.5%

D:24VDCR2: RS232,

R4: RS485,

V:0-10V OR ±10V

A:4-20mA

Y/N
Scroll to Top
Contact Us
Get the latest catalogs and quotations.

Thank you for your message. We will reply to your message within 24 hours. Please look for emails with the suffix @xjcsensor.com.