X-ZL15 Series Pillow Block Tension Sensor
X-ZL15 Series Pillow Block Tension Sensor
This type tension sensor can accurately detect the resultant force produced by pulling the material at the wrapping angle.It is mounted above the sensor which is easy to replace and install the Pillow Block and tension roller. This design enables the sensor to detect tension only, and eliminate interference from other directions, such as the weight of tension roller and support seat, etc.
Category
X-ZL15 Series Pillow Block Tension Sensor
Features
● Easy to install and replace the bearing and roller;
● Built-in new mechanical 10 times anti-overload protection;
● Minor temperature drift,good non-linearity and repeatability;
● Strong connections provide long-term reliability;
● Drilling and tapping are available;
● Can eliminate the interference of other forces, only measure tension to improve accuracy;
● Standard M12*1 plug
Description
XJC-ZL15 series Pillow Block type tension sensor can accurately detect the resultant force produced by pulling the material at the wrapping angle. The Pillow Block is mounted above the sensor which is easy to replace and install the Pillow Block and tension roller. This design enables the sensor to detect tension only, and eliminate interference from other directions, such as the weight of tension roller and support seat, etc. Stable and accurate signal. Compact structure and little deformation. Each sensor is verified by high and low temperature to ensure performance.
Technical Parameter
| Rated output | 1.5±0.2%mV/V | Non-linearity | 0.3% F.S. |
| Repeatability | 0.15%F.S. | Zero balance | ±2% F.S. |
| Operating temp range | -20~80°C | Compensated temp range | -10~40°C |
| Temp effect on zero | 0.02%F.S/°C | Insulation | ≥2000MΩ/100VDC |
| Recommended excitation voltage | 5~10VDC | Limit load | 1000%F.S. |
| Cable size | φ5x5m | Protection class | IP65 |
Dimensions
Force calculation
Installation
